diff --git a/.idea/material_theme_project_new.xml b/.idea/material_theme_project_new.xml
new file mode 100644
index 0000000..3337e7b
--- /dev/null
+++ b/.idea/material_theme_project_new.xml
@@ -0,0 +1,10 @@
+
+
+
+
+
+
\ No newline at end of file
diff --git a/sh/MD5.sh b/sh/MD5.sh
new file mode 100644
index 0000000..cede998
--- /dev/null
+++ b/sh/MD5.sh
@@ -0,0 +1,204 @@
+#!/bin/bash
+# ================================================
+# KR数据同步后 MD5 校验与重试脚本
+# 功能：对比源目录与远程目标目录的 MD5（基于相对路径），不一致则重新同步
+# 用法：./kr_data_sync_verify.sh [YYYYMMDD]
+# ================================================
+
+# ---------- 配置参数 ----------
+#SRC_BASE="/home/sysop/kr_md_save_pkt_loss_v5/data/stockdata" #南方
+SRC_BASE="/home/sysop/kr_md_save_centos7_9_20260317/data/stockdata" #金桥
+DEST_HOST="swdata@119.167.194.234"
+DEST_PORT="60000"
+#DEST_BASE="/mnt/data1/data_new_nf/data/stockdata" #南方
+DEST_BASE="/mnt/data1/data_new/data/stockdata" #金桥
+DEST_MARK_BASE="/mnt/data1/md5"
+SSH_OPTS="-o ConnectTimeout=30 -o BatchMode=yes -o StrictHostKeyChecking=no -o ServerAliveInterval=60 -o ServerAliveCountMax=3"
+LOG_DIR="/var/log/kr_data_sync"
+LOG_FILE="$LOG_DIR/verify_$(date +%Y%m%d).log"
+MAX_RETRIES=10
+
+mkdir -p "$LOG_DIR"
+
+# ---------- 日志函数 ----------
+log_info() {
+ echo "$(date '+%Y-%m-%d %H:%M:%S') [INFO] $1" | tee -a "$LOG_FILE"
+}
+log_error() {
+ echo "$(date '+%Y-%m-%d %H:%M:%S') [ERROR] $1" | tee -a "$LOG_FILE"
+}
+
+usage() {
+ echo "用法: $0 [YYYYMMDD]"
+ exit 1
+}
+
+check_dependencies() {
+ command -v rsync &>/dev/null || { log_error "请安装 rsync"; exit 1; }
+ command -v md5sum &>/dev/null || { log_error "请安装 md5sum"; exit 1; }
+}
+
+check_ssh() {
+ log_info "检查 SSH 连接..."
+ ssh -p "$DEST_PORT" $SSH_OPTS "$DEST_HOST" "echo ok" &>/dev/null || {
+ log_error "SSH 连接失败"
+ exit 1
+ }
+ log_info "SSH 连接正常"
+}
+
+check_remote_md5sum() {
+ ssh -p "$DEST_PORT" $SSH_OPTS "$DEST_HOST" "command -v md5sum" &>/dev/null || {
+ log_error "远程主机缺少 md5sum"
+ exit 1
+ }
+ log_info "远程 md5sum 可用"
+}
+
+ensure_remote_mark_dir() {
+ ssh -p "$DEST_PORT" $SSH_OPTS "$DEST_HOST" "mkdir -p '$DEST_MARK_BASE'" &>/dev/null || {
+ log_error "无法创建远程标记目录 $DEST_MARK_BASE"
+ exit 1
+ }
+ log_info "远程标记目录已确认: $DEST_MARK_BASE"
+}
+
+# ========== 生成相对路径的 MD5 列表 ==========
+generate_local_md5() {
+ local dir="$1"
+ local tmpfile=$(mktemp)
+ # 进入源目录，使用相对路径（以 ./ 开头）
+ (cd "$dir" && find . -type f -print0 2>/dev/null | xargs -0 md5sum 2>/dev/null | sort -k2) > "$tmpfile"
+ echo "$tmpfile"
+}
+
+generate_remote_md5() {
+ local dir="$1"
+ local tmpfile=$(mktemp)
+ # 远程进入目标目录，同样使用相对路径
+ ssh -p "$DEST_PORT" $SSH_OPTS "$DEST_HOST" "cd '$dir' && find . -type f -print0 2>/dev/null | xargs -0 md5sum 2>/dev/null | sort -k2" > "$tmpfile" 2>/dev/null
+ echo "$tmpfile"
+}
+# ====================================================
+
+compare_md5() {
+ local local_list="$1"
+ local remote_list="$2"
+ local diff_file=$(mktemp)
+
+ if [ ! -s "$local_list" ]; then
+ log_error "本地文件列表为空"
+ rm -f "$diff_file"
+ return 1
+ fi
+
+ if diff "$local_list" "$remote_list" > "$diff_file" 2>&1; then
+ log_info "MD5 校验一致"
+ rm -f "$diff_file"
+ return 0
+ else
+ log_error "MD5 校验不一致，差异如下："
+ cat "$diff_file" | tee -a "$LOG_FILE"
+ rm -f "$diff_file"
+ return 1
+ fi
+}
+
+do_sync() {
+ local src="$1"
+ local dest="$2"
+ log_info "开始同步: $src -> $dest"
+ rsync -avz --progress --delete \
+ -e "ssh -p $DEST_PORT $SSH_OPTS" \
+ "$src/" \
+ "$DEST_HOST:$dest/" 2>&1 | tee -a "$LOG_FILE"
+ local sync_result=${PIPESTATUS[0]}
+ if [ $sync_result -eq 0 ]; then
+ log_info "同步完成"
+ return 0
+ else
+ log_error "同步失败，退出码: $sync_result"
+ return 1
+ fi
+}
+
+create_mark_file() {
+ local date_str="$1"
+ #local remote_mark_file="$DEST_MARK_BASE/${date_str}_nf" #南方
+ local remote_mark_file="$DEST_MARK_BASE/${date_str}_jq" #金桥
+ echo "Sync completed and verified at $(date -u '+%Y-%m-%d %H:%M:%S UTC')" | \
+ ssh -p "$DEST_PORT" $SSH_OPTS "$DEST_HOST" "cat > '$remote_mark_file'"
+ if [ $? -eq 0 ]; then
+ log_info "已创建标记文件: $remote_mark_file"
+ else
+ log_error "创建标记文件失败"
+ exit 1
+ fi
+}
+
+main() {
+ local target_date="$1"
+ [ -z "$target_date" ] && target_date=$(date +%Y%m%d)
+ if ! [[ "$target_date" =~ ^[0-9]{8}$ ]]; then
+ log_error "日期格式必须为 YYYYMMDD"
+ usage
+ fi
+
+ local src_dir="$SRC_BASE/$target_date"
+ local dest_dir="$DEST_BASE/$target_date"
+ local remote_mark_file="$DEST_MARK_BASE/$target_date"
+
+ log_info "========== 开始 MD5 校验与同步任务 =========="
+ log_info "日期: $target_date"
+ log_info "源目录: $src_dir"
+ log_info "目标目录: $dest_dir"
+ log_info "标记文件: $remote_mark_file"
+
+ [ ! -d "$src_dir" ] && { log_error "源目录不存在: $src_dir"; exit 1; }
+
+ check_dependencies
+ check_ssh
+ check_remote_md5sum
+ ensure_remote_mark_dir
+
+ local retry_count=0
+ local success=false
+
+ while [ $retry_count -lt $MAX_RETRIES ]; do
+ retry_count=$((retry_count + 1))
+ log_info "===== 第 $retry_count 次校验 ====="
+
+ local local_md5=$(generate_local_md5 "$src_dir")
+ local remote_md5=$(generate_remote_md5 "$dest_dir")
+
+ if compare_md5 "$local_md5" "$remote_md5"; then
+ success=true
+ rm -f "$local_md5" "$remote_md5"
+ break
+ else
+ rm -f "$local_md5" "$remote_md5"
+ log_info "MD5 不一致，执行同步..."
+ if ! do_sync "$src_dir" "$dest_dir"; then
+ log_error "同步失败，终止重试"
+ exit 1
+ fi
+ sleep 5
+ fi
+ done
+
+ if [ "$success" = true ]; then
+ log_info "经过 $retry_count 次校验，MD5 已一致"
+ create_mark_file "$target_date"
+ log_info "任务完成，已生成标记文件"
+ else
+ log_error "达到最大重试次数 $MAX_RETRIES，仍然无法使 MD5 一致"
+ exit 1
+ fi
+
+ log_info "========== 任务结束 =========="
+}
+
+if [ "$1" = "-h" ] || [ "$1" = "--help" ]; then
+ usage
+fi
+main "$1"
\ No newline at end of file
diff --git a/sh/catps.txt b/sh/catps.txt
new file mode 100644
index 0000000..ed77255
--- /dev/null
+++ b/sh/catps.txt
@@ -0,0 +1,55 @@
+cat > /home/system/zabbix_agent/ps/check_heartbeat.sh << 'EOF'
+#!/bin/bash
+# 获取当前小时和分钟
+current_hour=$(date +"%H"|sed 's/^0//')
+current_minute=$(date +"%M"|sed 's/^0//')
+
+# 转换为24小时制的时间格式
+current_time=$((current_hour * 60 + current_minute))
+
+# 设定时间段（09:15到14:57）的开始和结束时间（以分钟计）
+start_time=$((9*60+15)) # 09:15
+end_time=$((14*60+57)) # 14:57
+
+#展示strategy_date_*.log的文件路径
+strategy_dir=$(find /home/system/app_* -name "strategy_`date '+%Y%m%d'`_*.log" -regextype posix-extended ! -regex '.*/test_log/.*')
+
+#在9:00-14:57循环判断日志时间和系统时间相差是否超过30s
+if [[ $current_time -ge $start_time ]] && [[ $current_time -lt $end_time ]]; then
+ if [[ -z "${strategy_dir}" ]]; then
+ echo 0 #心跳正常
+ else
+ array_error=()
+ for dir_path in ${strategy_dir}; do
+ time_heart=$(# 取最后1000行，直接匹配最后一个时间 time 或 timestamp 字段并提取日期时间
+ tail -n 1000 ${dir_path} | grep -E '"time"|"timestamp"' | tail -2 | head -1 | sed -E '
+ # 格式1: "time": "2025-12-12 14:56:25:010" -> 2025-12-12 14:56:25
+ s/.*"time"[[:space:]]*:[[:space:]]*"([0-9]{4}-[0-9]{2}-[0-9]{2}) ([0-9]{2}:[0-9]{2}:[0-9]{2}):[0-9]+".*/\1 \2/p
+
+ # 格式2: "timestamp": "12/12/2025, 14:56:26" -> 2025-12-12 14:56:26
+ s/.*"timestamp"[[:space:]]*:[[:space:]]*"([0-9]{2})\/([0-9]{2})\/([0-9]{4}), ([0-9]{2}:[0-9]{2}:[0-9]{2})".*/\3-\1-\2 \4/p
+ ' -n)
+
+ ct=$(date +%s)
+ lt=$(date -d "${time_heart}" +%s)
+ minus=$((${ct} - ${lt}))
+ if [[ -z "${time_heart}" ]]; then
+ continue
+ else
+ if [[ ${minus} -ge 180 ]]; then
+ array_error+=(${dir_path})
+ fi
+ fi
+ done
+ if [[ ${#array_error[@]} -gt 0 ]]; then
+ echo ${array_error[@]} #列出数组的所有元素
+ else
+ echo 0 #心跳正常
+ fi
+ fi
+else
+ echo 0 #心跳正常
+fi
+EOF
+
+sh /home/system/zabbix_agent/ps/check_heartbeat.sh
diff --git a/sh/check_heartbeat.txt b/sh/check_heartbeat.txt
new file mode 100644
index 0000000..22b0c32
--- /dev/null
+++ b/sh/check_heartbeat.txt
@@ -0,0 +1,57 @@
+#!/bin/bash
+# 获取当前小时和分钟
+current_hour=$(date +"%H"|sed 's/^0//')
+current_minute=$(date +"%M"|sed 's/^0//')
+
+# 转换为24小时制的时间格式
+current_time=$((current_hour * 60 + current_minute))
+
+# 设定时间段（09:15到14:57）的开始和结束时间（以分钟计）
+start_time=$((9*60+15)) # 09:15
+end_time=$((14*60+57)) # 14:57
+filter_time=$((9*60+35)) # 09:35
+
+#展示strategy_date_*.log的文件路径
+strategy_dir=$(find /home/system/app_* -name "strategy_`date '+%Y%m%d'`_*.log" -regextype posix-extended ! -regex '.*/test_log/.*')
+
+# 新增：九点三十五之后过滤 fundflow
+if [[ $current_time -ge $filter_time ]]; then
+ strategy_dir=$(echo "$strategy_dir" | grep -v 'fundflow')
+fi
+
+#在9:00-14:57循环判断日志时间和系统时间相差是否超过30s
+if [[ $current_time -ge $start_time ]] && [[ $current_time -lt $end_time ]]; then
+ if [[ -z "${strategy_dir}" ]]; then
+ echo 0 #心跳正常
+ else
+ array_error=()
+ for dir_path in ${strategy_dir}; do
+ time_heart=$(# 取最后1000行，直接匹配最后一个时间 time 或 timestamp 字段并提取日期时间
+ tail -n 1000 ${dir_path} | grep -E '"time"|"timestamp"' | tail -2 | head -1 | sed -E '
+ # 格式1: "time": "2025-12-12 14:56:25:010" -> 2025-12-12 14:56:25
+ s/.*"time"[[:space:]]*:[[:space:]]*"([0-9]{4}-[0-9]{2}-[0-9]{2}) ([0-9]{2}:[0-9]{2}:[0-9]{2}):[0-9]+".*/\1 \2/p
+
+ # 格式2: "timestamp": "12/12/2025, 14:56:26" -> 2025-12-12 14:56:26
+ s/.*"timestamp"[[:space:]]*:[[:space:]]*"([0-9]{2})\/([0-9]{2})\/([0-9]{4}), ([0-9]{2}:[0-9]{2}:[0-9]{2})".*/\3-\1-\2 \4/p
+ ' -n)
+
+ ct=$(date +%s)
+ lt=$(date -d "${time_heart}" +%s)
+ minus=$((${ct} - ${lt}))
+ if [[ -z "${time_heart}" ]]; then
+ continue
+ else
+ if [[ ${minus} -ge 180 ]]; then
+ array_error+=(${dir_path})
+ fi
+ fi
+ done
+ if [[ ${#array_error[@]} -gt 0 ]]; then
+ echo ${array_error[@]} #列出数组的所有元素
+ else
+ echo 0 #心跳正常
+ fi
+ fi
+else
+ echo 0 #心跳正常
+fi
diff --git a/sh/check_xtpsvr.txt b/sh/check_xtpsvr.txt
new file mode 100644
index 0000000..2c257d8
--- /dev/null
+++ b/sh/check_xtpsvr.txt
@@ -0,0 +1,29 @@
+#!/bin/bash
+
+# 配置企业微信机器人Webhook URL
+WEBHOOK_URL="https://qyapi.weixin.qq.com/cgi-bin/webhook/send?key=your_webhook_key"
+
+# 检查xtpsvr进程是否运行
+if ps -ef | grep -q '[x]tpsvr'; then
+ exit 0 # 进程正常运行，静默退出
+else
+ # 构造告警消息
+ ALERT_MSG=" xtpsvr进程已停止运行！\n> 服务器: $(hostname)\n> 时间: $(date "+%Y-%m-%d %H:%M:%S")"
+
+ # JSON消息体
+ JSON_MSG=$(cat </dev/null 2>&1 &
+
+ exit 1
+fi
\ No newline at end of file
diff --git a/sh/init.sh b/sh/init.sh
new file mode 100644
index 0000000..2ef7609
--- /dev/null
+++ b/sh/init.sh
@@ -0,0 +1,266 @@
+#!/bin/bash
+
+# 设置脚本在遇到错误时立即退出
+set -e
+
+[ "$(id -u)" -ne 0 ] && { echo "必须以 root 用户身份运行此脚本。"; exit 1; }
+
+# 检查 tuned-adm 命令是否存在，如果存在则执行
+if command -v tuned-adm &> /dev/null; then
+ tuned-adm profile network-latency
+else
+ echo "Warning: The 'tuned-adm' command is not available."
+fi
+
+# EPB not enabled on this platform
+#x86_energy_perf_policy performance
+
+###################### core ###################
+echo "# 开始检查内核参数..."
+# limits.conf
+declare -r LIMITS_CONF_APPEND='
+* soft core unlimited
+* hard core unlimited
+'
+if ! grep -qE '\* soft core unlimited|\* hard core unlimited' /etc/security/limits.conf; then
+ echo "$LIMITS_CONF_APPEND" >> /etc/security/limits.conf
+else
+ echo "The limits have already been set in /etc/security/limits.conf"
+fi
+
+ulimit -c unlimited
+
+
+###################### rc.local ###################
+echo "# 开始检查rc.local..."
+# rc.local
+if [ ! -f "/etc/rc.d/rc.local" ]; then
+ echo "Error: /etc/rc.d/rc.local file does not exist. Aborting."
+ exit 1
+fi
+chmod +x /etc/rc.d/rc.local
+
+ETHTOOL_COMMANDS=(
+ "ethtool -G p1p1 rx 2048 tx 2048"
+ "ethtool -G ens1f0 rx 2048 tx 2048"
+ "ethtool -C ens1f0 rx-usecs 0 rx-usecs-irq 0 adaptive-rx off"
+ "ethtool -C p1p2 rx-usecs 0 rx-usecs-irq 0 adaptive-rx off"
+)
+# 检查 rc.local 文件中是否已包含相应行，如果没有则追加
+for cmd in "${ETHTOOL_COMMANDS[@]}"; do
+ if ! grep -Fxq "$cmd" /etc/rc.d/rc.local; then
+ echo "$cmd" >> /etc/rc.d/rc.local
+ fi
+done
+
+###################### GRUB ###################
+## TODO: 这个需要手工操作
+echo "# 开始检查GRUB..."
+# 设置GRUB 引导参数
+
+# 读取当前GRUB_CMDLINE_LINUX值
+CURRENT_CMDLINE=$(grep GRUB_CMDLINE_LINUX /etc/default/grub | cut -d '"' -f2)
+
+# 获取系统CPU核心数
+CPU_COUNT=$(nproc)
+
+# 要检查和添加的配置项
+ADDITIONAL_OPTS="ipv6.disable=1 selinux=0 isolcpus=1-$((CPU_COUNT-1)) nohz_full=1-$((CPU_COUNT-1)) transparent_hugepage=never default_hugepagesz=1G hugepagesz=1G hugepages=32 intel_idle.max_cstate=0 processor.max_cstate=0 idle=poll intel_iommu=off nosoftlockup mce=ignore_ce nmi_watchdog=0 pcie_aspm=off nohz=off audit=0"
+
+# 需要检查的配置项列表（排除isolcpus和nohz_full）
+CHECK_OPTS="ipv6.disable=1 selinux=0 transparent_hugepage=never default_hugepagesz=1G hugepagesz=1G hugepages=32 intel_idle.max_cstate=0 processor.max_cstate=0 idle=poll intel_iommu=off nosoftlockup mce=ignore_ce nmi_watchdog=0 pcie_aspm=off nohz=off audit=0"
+
+# 检查并添加配置项
+for opt in $CHECK_OPTS; do
+ if [[ ! $CURRENT_CMDLINE =~ $opt ]]; then
+ CURRENT_CMDLINE+=" $opt"
+ fi
+done
+
+# 特别处理 isolcpus 和 nohz_full
+if [[ ! $CURRENT_CMDLINE =~ isolcpus= ]]; then
+ CURRENT_CMDLINE+=" isolcpus=1-$((CPU_COUNT-1))"
+fi
+if [[ ! $CURRENT_CMDLINE =~ nohz_full= ]]; then
+ CURRENT_CMDLINE+=" nohz_full=1-$((CPU_COUNT-1))"
+fi
+
+# 更新GRUB_CMDLINE_LINUX
+#awk -v cmdline="${CURRENT_CMDLINE}" 'BEGIN{FS="=";OFS="="} $1 == "GRUB_CMDLINE_LINUX" {$2 = "\""cmdline"\""} 1' /etc/default/grub | tee /etc/default/grub > /dev/null
+
+# 重启grub配置
+#update-grub
+
+####################### 大页检查 ########################
+echo "# 开始检查大页..."
+
+# 检查 HugePages 是否启用
+HUGE_PAGES_TOTAL=$(grep -i HugePages_Total /proc/meminfo | awk '{print $2}')
+if [ "$HUGE_PAGES_TOTAL" -eq 0 ]; then
+ echo "Error: HugePages are not enabled or configured properly."
+else
+ echo "HugePages are enabled with a total of $HUGE_PAGES_TOTAL pages."
+fi
+
+# 检查 hugetlbfs 是否挂载
+if ! mount | grep -q hugetlbfs; then
+ echo "Error: hugetlbfs is not mounted."
+else
+ echo "hugetlbfs is correctly mounted."
+fi
+
+# 如果 HugePages 没有启用或 hugetlbfs 没有挂载，进行配置
+if [ "$HUGE_PAGES_TOTAL" -eq 0 ] || ! mount | grep -q hugetlbfs; then
+ echo "Configuring HugePages..."
+
+ # 更新内核参数
+ grubby --update-kernel=ALL --args="default_hugepagesz=1G hugepagesz=1G hugepages=4"
+
+ # 检查配置是否成功
+ if grubby --info=ALL | grep -q "default_hugepagesz=1G"; then
+ echo "HugePages configuration updated successfully."
+
+ # 尝试挂载 hugetlbfs
+ mkdir -p /dev/hugepages
+ mount -t hugetlbfs nodev /dev/hugepages
+
+ if mount | grep -q hugetlbfs; then
+ echo "hugetlbfs mounted successfully."
+ else
+ echo "Error: Failed to mount hugetlbfs."
+ fi
+ else
+ echo "Error: Failed to update HugePages configuration."
+ fi
+fi
+
+####################### 检查虚拟网卡 ########################
+echo "# 开始检查并删除虚拟网卡..."
+
+set +e
+systemctl stop libvirtd.service 2>/dev/null
+systemctl disable libvirtd.service 2>/dev/null
+set -e
+
+# 检查 virbr0 网桥是否存在
+if ifconfig virbr0 &> /dev/null; then
+ echo "virbr0 exists."
+ # 如果存在，可以在此处添加删除 virbr0 的命令
+ # 因为 libvirt 会在需要时自动重建它
+ # 可以考虑使用 libvirt 的工具来管理网络，例如 'virsh net-destroy default'
+else
+ echo "virbr0 does not exist."
+fi
+
+####################### selinux ########################
+echo "# 开始关闭SELINUX..."
+
+# 检查 SELinux 当前的状态
+current_selinux_status=$(grep ^SELINUX= /etc/selinux/config | awk -F "=" '{print $2}' | tr -d ' ')
+
+# 如果 SELinux 不是 disabled 状态，则进行修改
+if [ "$current_selinux_status" != "disabled" ]; then
+ # 备份原来的配置文件
+ cp /etc/selinux/config /etc/selinux/config.bak
+
+ # 使用 sed 命令更新 SELINUX 参数为 disabled
+ sed -i 's/^SELINUX=.*/SELINUX=disabled/' /etc/selinux/config
+
+ echo "SELinux has been set to disabled."
+else
+ echo "SELinux is already disabled."
+fi
+
+####################### 网络低延迟 ########################
+echo "# 开始设置网络低延迟..."
+
+cd /proc/sys/net/ipv4
+sysctl -w net.core.rmem_default=134217728
+sysctl -w net.core.rmem_max=134217728
+sysctl -w net.core.wmem_default=134217728
+sysctl -w net.core.wmem_max=134217728
+sysctl -w net.ipv4.udp_mem="134217728 134217728 268435456"
+sysctl -w net.ipv4.udp_rmem_min=134217728
+sysctl -w net.ipv4.udp_wmem_min=134217728
+
+sh -c 'echo "net.ipv4.tcp_low_latency = 0" >> /etc/sysctl.conf'
+sh -c 'echo "vm.nr_hugepages=4096" >> /etc/sysctl.conf'
+sh -c 'echo "net.core.rmem_default=134217728" >> /etc/sysctl.conf'
+sh -c 'echo "net.core.rmem_max=134217728" >> /etc/sysctl.conf'
+sh -c 'echo "net.core.wmem_default=134217728" >> /etc/sysctl.conf'
+sh -c 'echo "net.core.wmem_max=134217728" >> /etc/sysctl.conf'
+sh -c 'echo "net.ipv4.udp_mem=134217728 134217728 268435456" >> /etc/sysctl.conf'
+sh -c 'echo "net.ipv4.udp_rmem_min=134217728" >> /etc/sysctl.conf'
+sh -c 'echo "net.ipv4.udp_wmem_min=134217728" >> /etc/sysctl.conf'
+sh -c 'echo "net.core.netdev_max_backlog=4000" >> /etc/sysctl.conf'
+
+sysctl -p /etc/sysctl.conf
+
+####################### 关闭服务 ########################
+echo "# 开始关闭各种无用的服务..."
+
+set +e
+
+systemctl set-default multi-user.target
+systemctl disable firewalld.service
+systemctl stop firewalld.service
+
+systemctl stop libvirtd.service
+systemctl disable libvirtd.service
+systemctl stop iptables.service
+systemctl stop firewalld.service
+systemctl stop irqbalance.service
+systemctl stop abrt-ccpp.service
+systemctl stop abrt-oops.service
+systemctl stop abrt-xorg.service
+systemctl stop abrtd.service
+systemctl stop alsa-state.service
+systemctl stop cups.service
+systemctl stop ModemManager.service
+systemctl stop postfix.service
+systemctl disable firewalld.service
+systemctl disable iptables.service
+systemctl disable irqbalance.service
+systemctl disable alsa-state.service
+systemctl disable cups.service
+systemctl disable ModemManager.service
+systemctl disable postfix.service
+systemctl stop cpuspower
+systemctl stop firewalld
+
+#chkconfig NetworkManager off
+#chkconfig --del NetworkManager
+
+set -e
+
+
+# 检查 tuned-adm 命令是否存在，如果存在则执行
+if command -v tuned-adm &> /dev/null; then
+ tuned-adm profile network-latency
+else
+ echo "Warning: The 'tuned-adm' command is not available."
+fi
+
+####################### SSH配置 ########################
+echo "# 开始配置SSH服务..."
+ssh_options="ClientAliveInterval 30
+ClientAliveCountMax 10"
+
+# 检查这些行是否已存在于 sshd_config 文件中
+if ! grep -qxF "[[:space:]]*ClientAliveInterval 30" /etc/ssh/sshd_config ||
+ ! grep -qxF "[[:space:]]*ClientAliveCountMax 10" /etc/ssh/sshd_config; then
+ # 如果不存在，则添加到文件的末尾
+ echo -e "$ssh_options" >> /etc/ssh/sshd_config
+ echo "Options added to /etc/ssh/sshd_config"
+else
+ echo "Options already present in /etc/ssh/sshd_config"
+fi
+
+# 重启 SSH 服务
+systemctl restart sshd
+
+####################### SSH配置 ########################
+echo "# 开始添加用户boyi_trader..."
+useradd boyi_trader
+
+echo "DONE! PLS RESTART!"
\ No newline at end of file
diff --git a/sh/log_del.bat b/sh/log_del.bat
new file mode 100644
index 0000000..a1c72fe
--- /dev/null
+++ b/sh/log_del.bat
@@ -0,0 +1,37 @@
+@echo off
+setlocal enabledelayedexpansion
+
+rem 设置保留天数
+set days_to_keep=3
+
+rem 计算截止日期（当前日期减去保留天数）
+for /f "tokens=1-3 delims=/- " %%a in ('date /t') do (
+ set current_day=%%a
+ set current_month=%%b
+ set current_year=%%c
+)
+
+rem 使用PowerShell计算截止日期（更准确的方法）
+for /f %%d in ('powershell -command "(Get-Date).AddDays(-%days_to_keep%).ToString('yyyy-MM-dd')"') do (
+ set cutoff_date=%%d
+)
+
+echo 正在删除 %cutoff_date% 之前的日志文件...
+echo.
+
+for /D %%A in ("D:\*") do (
+ if exist "%%A\userdata\log\*.log" (
+ echo 正在检查目录: %%A\userdata\log
+
+ rem 使用forfiles命令删除3天前的文件
+ forfiles /p "%%A\userdata\log" /m "*.log" /d -%days_to_keep% /c "cmd /c echo 正在删除 @path && del /q @path"
+
+ rem 显示剩余文件
+ echo 剩余文件:
+ dir "%%A\userdata\log\*.log" /b 2>nul || echo 目录中没有日志文件
+ echo.
+ )
+)
+
+echo 清理完成!
+pause
\ No newline at end of file
diff --git a/sh/logseq_del.bat b/sh/logseq_del.bat
new file mode 100644
index 0000000..09e0e06
--- /dev/null
+++ b/sh/logseq_del.bat
@@ -0,0 +1,6 @@
+@echo off
+set SrcDir=C:\test
+set DaysAgo=0 %Զ壬˴0ǰ%
+forfiles /p %SrcDir% /s /m udpseq* /c "cmd /c del /f /q /a @path"
+forfiles /p %SrcDir% /s /m INFO_* /c "cmd /c del /f /q /a @path"
+forfiles /p %SrcDir% /s /m quote.log.* /c "cmd /c del /f /q /a @path"
\ No newline at end of file
diff --git a/sh/reboot_route_nc.txt b/sh/reboot_route_nc.txt
new file mode 100644
index 0000000..dab6a98
--- /dev/null
+++ b/sh/reboot_route_nc.txt
@@ -0,0 +1,370 @@
+#!/bin/bash
+#定义颜色变量
+RED='\E[1;31m' # 红
+GREEN='\E[1;32m' # 绿
+YELOW='\E[1;33m' # 黄
+BLUE='\E[1;34m' # 蓝
+PINK='\E[1;35m' # 粉红
+SHAN='\E[33;5m' # 黄色闪烁警示
+RES='\E[0m' # 清除颜色
+#定义颜色动作
+SETCOLOR_SUCCESS="echo -en \\E[1;32m"
+SETCOLOR_FAILURE="echo -en \\E[1;31m"
+SETCOLOR_WARNING="echo -en \\E[1;33m"
+SETCOLOR_NORMAL="echo -en \\E[0;39m"
+
+#定义变量
+date=` date +'%Y%m%d_%H%M%S' `
+date_init=` date +'%Y%m%d %H:%M:%S' `
+scripts_path='/root/scripts'
+original='original.conf'
+trans_file='trans_server.txt'
+aliyun_file='visit_aliyun_server.txt'
+passwd_file='password.txt'
+nc_file='nc_ipport.txt'
+aliyun_nc_file='aliyun_nc_ipport.txt'
+nc_yes_no='nc_yes_no.log'
+nc_rpm='nmap-ncat-6.40-19.el7.x86_64.rpm'
+ssh_port=22
+
+#准备开始
+echo -e "\n\n***********************************************"
+echo -e "* ${YELOW} 服务器清除缓存开始！ ${RES} *"
+echo -e "* ${YELOW} ${date_init} ${RES} *"
+echo -e "***********************************************\n\n"
+
+#判断系统本身是否已安装nc,sshpass
+which nc > /dev/null 2>&1
+if [ $? -ne 0 ]; then
+ echo -e "${RED} 请先安装nc ${RES}"
+ exit
+fi
+
+which sshpass > /dev/null 2>&1
+if [ $? -ne 0 ]; then
+ echo -e "${RED} 请先安装sshpass ${RES}"
+ exit
+fi
+
+#判断目录是否存在
+if [ ! -d ${scripts_path}/conf ] || [ ! -d ${scripts_path}/files ] || [ ! -d ${scripts_path}/build ] || [ ! -d ${scripts_path}/rpm ] || [ ! -d ${scripts_path}/backup ] ; then
+ mkdir -p ${scripts_path}/conf ${scripts_path}/files ${scripts_path}/build ${scripts_path}/rpm ${scripts_path}/backup
+fi
+
+#判断配置文件是否存在
+if [ ! -f ${scripts_path}/conf/${original} ] ; then
+ echo -e "${RED} 配置文件${scripts_path}/conf/${original}不存在，请先添加配置文件。 ${RES}"
+ exit
+fi
+
+if [ ! -f ${scripts_path}/rpm/${nc_rpm} ] ; then
+ ehco -e "${RED} nc包${scripts_path}/rpm/${nc_rpm}不存在，请先上传安装包。 ${RES} "
+ exit
+fi
+
+#判断本机IP在original.conf配置文件里面是否存在，如果存在就删除该行
+ip a | grep "inet " | awk '{print $2}' | awk -F'/' '{print $1}' > ${scripts_path}/build/local_ip.txt
+for local_ip in $(cat ${scripts_path}/build/local_ip.txt) ; do
+ sed -i "/${local_ip}/d" ${scripts_path}/conf/${original}
+done
+rm -rf ${scripts_path}/build/local_ip.txt
+
+#扫描配置文件内容到对应的文件
+grep ${trans_file%.txt} ${scripts_path}/conf/${original} | grep -v ${trans_file} | grep -v ^# | awk -F, '{print $1}' > ${scripts_path}/build/${trans_file}
+grep ${aliyun_file%.txt} ${scripts_path}/conf/${original} | grep -v ${aliyun_file} | grep -v ^# | awk -F, '{print $1}' > ${scripts_path}/build/${aliyun_file}
+grep ${passwd_file%.txt} ${scripts_path}/conf/${original} | grep -v ${passwd_file} | grep -v ^# | awk -F, '{print $1}' > ${scripts_path}/build/${passwd_file}
+grep ${nc_file%.txt} ${scripts_path}/conf/${original} | grep -v ${nc_file} | grep -v ${aliyun_nc_file%.txt} | grep -v ^# | awk -F, '{print $1}' > ${scripts_path}/build/${nc_file}
+grep ${aliyun_nc_file%.txt} ${scripts_path}/conf/${original} | grep -v ${aliyun_nc_file} | grep -v ^# | awk -F, '{print $1}' > ${scripts_path}/build/${aliyun_nc_file}
+
+#判断文件是否为空
+echo > ${scripts_path}/files/${nc_yes_no}
+if [ ! -s ${scripts_path}/build/${trans_file} ] ; then
+ echo -e "${RED} 交易服务器IP为空 ${RES}"
+ echo "交易服务器IP为空" >> ${scripts_path}/files/${nc_yes_no}
+ exit
+fi
+
+if [ ! -s ${scripts_path}/build/${passwd_file} ] ; then
+ echo -e "${RED} 服务器登录密码为空 ${RES}"
+ echo "服务器登录密码为空" >> ${scripts_path}/files/${nc_yes_no}
+ exit
+fi
+
+if [ ! -s ${scripts_path}/build/${nc_file} ] ; then
+ echo -e "${RED} 外访IP端口号为空 ${RES}"
+ echo "访IP端口号为空" >> ${scripts_path}/files/${nc_yes_no}
+ exit
+fi
+
+#显示要测试的服务器IP
+echo -e "\n本次要测试的服务器IP为：" >> ${scripts_path}/files/${nc_yes_no}
+awk '{print $0}' ${scripts_path}/build/${trans_file} >> ${scripts_path}/files/${nc_yes_no}
+echo -e "\n===============================================\n" >> ${scripts_path}/files/${nc_yes_no}
+
+#测试交易服务器是否能ssh远程连接
+array_ssherror=()
+for trans_ip in $(cat ${scripts_path}/build/${trans_file}) ; do
+ nc -zw2 ${trans_ip} ${ssh_port}
+ if [ $? -eq 0 ]; then
+ echo -e "${GREEN} ${trans_ip}:${ssh_port} 端口访问成功 ${RES}"
+ else
+ echo -e "${RED} ${trans_ip}:${ssh_port} 端口访问失败 ${RES}"
+ echo "${trans_ip}:${ssh_port} 端口访问失败" >> ${scripts_path}/files/${nc_yes_no}
+ sed -i "/${trans_ip}/d" ${scripts_path}/build/${trans_file}
+ array_ssherror+=("${trans_ip}:${ssh_port}--端口访问失败")
+ fi
+done
+
+#分割线
+echo -e "\n===============================================\n"
+
+#测试交易服务器是否能正常登录
+array_login=()
+for trans_ip in $(cat ${scripts_path}/build/${trans_file}) ; do
+ sshpass -f ${scripts_path}/build/${passwd_file} ssh -o StrictHostKeyChecking=no -o ConnectTimeout=2 root@${trans_ip} 'ls' > /dev/null 2>&1
+ if [ $? -eq 0 ]; then
+ echo -e "${GREEN} ${trans_ip} 登录成功 ${RES}"
+ else
+ echo -e "${RED} ${trans_ip} 用户名或密码错误 ${RES}"
+ echo "${trans_ip} 用户名或密码错误" >> ${scripts_path}/files/${nc_yes_no}
+ sed -i "/${trans_ip}/d" ${scripts_path}/build/${trans_file}
+ array_login+=("${trans_ip}--用户名或密码错误")
+ fi
+done
+
+#分割线
+echo -e "\n===============================================\n"
+
+#检查远程服务器是否已经安装nc，如果没有安装，则拷贝过去进行安装，如果还是失败，就跳过
+array_nc=()
+for trans_ip in $(cat ${scripts_path}/build/${trans_file}) ; do
+ sshpass -f ${scripts_path}/build/${passwd_file} ssh -o StrictHostKeyChecking=no root@${trans_ip} 'which nc' > /dev/null 2>&1
+ if [ $? -ne 0 ]; then
+ sshpass -f ${scripts_path}/build/${passwd_file} scp -o StrictHostKeyChecking=no ${scripts_path}/rpm/${nc_rpm} root@${trans_ip}:/root
+ sshpass -f ${scripts_path}/build/${passwd_file} ssh -o StrictHostKeyChecking=no root@${trans_ip} 'rpm -ivh nmap-ncat-6.40-19.el7.x86_64.rpm' > /dev/null 2>&1
+ if [ $? -ne 0 ]; then
+ echo -e "${RED} ${trans_ip} nc安装失败！ ${RES}"
+ echo "${trans_ip} nc安装失败！" >> ${scripts_path}/files/${nc_yes_no}
+ sed -i "/${trans_ip}/d" ${scripts_path}/build/${trans_file}
+ array_nc+=("${trans_ip}--nc安装失败！")
+ fi
+ fi
+done
+
+#备份重启前的路由表并且重启
+for trans_ip in $(cat ${scripts_path}/build/${trans_file}) ; do
+ sshpass -f ${scripts_path}/build/${passwd_file} ssh -o StrictHostKeyChecking=no root@${trans_ip} 'route -n > /root/route.txt'
+ sshpass -f ${scripts_path}/build/${passwd_file} scp -o StrictHostKeyChecking=no root@${trans_ip}:/root/route.txt ${scripts_path}/files/${trans_ip}_old.txt
+ sshpass -f ${scripts_path}/build/${passwd_file} ssh -o StrictHostKeyChecking=no root@${trans_ip} 'reboot' > /dev/null 2>&1
+ echo -e "${YELOW} ${trans_ip} 正在重启... ${RES}"
+done
+
+#分割线
+echo -e "\n===============================================\n"
+
+#检测服务器是否重启成功
+array_reboot=()
+reboot_num=0
+for trans_ip in $(cat ${scripts_path}/build/${trans_file}) ; do
+
+ #设置倒计时时间（秒）
+ end_time=$(( $(date +%s) + 600 )) # 600秒后结束倒计时的时间戳（当前时间戳+600秒）
+
+ #实时倒计时循环
+ while [ "$(date +%s)" -lt "$end_time" ] ; do
+ current_time=$(( $(date +%s) - $(date +%s -d "1970-01-01 UTC") )) #当前时间戳减去1970年1月1日UTC的时间戳，得到当前时间（秒）
+ remaining=$(( end_time - current_time )) #计算剩余时间（秒）
+ sshpass -f ${scripts_path}/build/${passwd_file} ssh -o StrictHostKeyChecking=no -o ConnectTimeout=2 -n root@${trans_ip} 'ls' > /dev/null 2>&1
+ if [ $? -ne 0 ]; then
+ display_array=( "正在重启. " "正在重启.. " "正在重启..." )
+ for dis_cat in "${display_array[@]}"; do
+ current_time=$(( $(date +%s) - $(date +%s -d "1970-01-01 UTC") )) #当前时间戳减去1970年1月1日UTC的时间戳，得到当前时间（秒）
+ remaining=$(( end_time - current_time )) #计算剩余时间（秒）
+ printf " %s 倒计时：%03d秒\r" "服务器${trans_ip} ${dis_cat}" "${remaining}" #\r使光标回到行首，实现实时更新显示，不换行
+ sleep 1
+ echo -ne "\033[2K"
+ done
+ else
+ echo -e "${GREEN} ${trans_ip} 重启成功 ${RES} "
+ break
+ fi
+ done
+ sleep 1
+ if [ "$(date +%s)" -ge "$end_time" ] ; then
+ echo -ne "\033[2K"
+ echo -e "${RED} ${trans_ip} 重启失败 ${RES} "
+ reboot_num=$(( reboot_num + 1 ))
+ array_reboot+=("${trans_ip}--重启失败")
+ fi
+done
+
+if [ ${reboot_num} -ne 0 ] ; then
+ echo -e "\n${RED} 有${reboot_num}个服务器重启失败 ${RES}"
+ echo "有${reboot_num}个服务器重启失败" >> ${scripts_path}/files/${nc_yes_no}
+fi
+
+#echo -e "\n${GREEN} 服务器重启中，请等待10分钟... ${RES}\n"
+
+##设置倒计时时间（秒）
+#end_time=$(( $(date +%s) + 600 )) # 600秒后结束倒计时的时间戳（当前时间戳+600秒）
+
+##实时倒计时循环
+#while [ "$(date +%s)" -lt "$end_time" ]; do
+# current_time=$(( $(date +%s) - $(date +%s -d "1970-01-01 UTC") )) #当前时间戳减去1970年1月1日UTC的时间戳，得到当前时间（秒）
+# remaining=$(( end_time - current_time )) #计算剩余时间（秒）
+# printf " 倒计时：%03d秒\r" $remaining #\r使光标回到行首，实现实时更新显示，不换行
+# sleep 1 #等待1秒
+#done
+#echo " 倒计时结束！"
+
+#分割线
+#echo -e "\n===============================================\n"
+
+##检测服务器是否重启成功
+#reboot_num=0
+#for trans_ip in $(cat ${scripts_path}/build/${trans_file}) ; do
+# sshpass -f ${scripts_path}/build/${passwd_file} ssh -o StrictHostKeyChecking=no -o ConnectTimeout=2 root@${trans_ip} 'ls' > /dev/null 2>&1
+# if [ $? -eq 0 ]; then
+# echo -e "${GREEN} ${trans_ip} 重启成功 ${RES}"
+# else
+# echo -e "${RED} ${trans_ip} 重启失败 ${RES}"
+# echo "${trans_ip} 重启失败" >> ${scripts_path}/files/${nc_yes_no}
+# sed -i "/${trans_ip}/d" ${scripts_path}/build/${trans_file}
+# reboot_num=$(( reboot_num + 1 ))
+# fi
+#done
+#if [ ${reboot_num} -ne 0 ] ; then
+# echo -e "\n${RED} 有${reboot_num}个服务器重启失败 ${RES}"
+# echo "有${reboot_num}个服务器重启失败" >> ${scripts_path}/files/${nc_yes_no}
+#fi
+
+#分割线
+echo -e "\n===============================================\n"
+
+#备份重启后的路由表并且对比看是否一致
+array_diffroute=()
+route_num=0
+for trans_ip in $(cat ${scripts_path}/build/${trans_file}) ; do
+ sshpass -f ${scripts_path}/build/${passwd_file} ssh -o StrictHostKeyChecking=no root@${trans_ip} 'route -n > /root/route.txt'
+ sshpass -f ${scripts_path}/build/${passwd_file} scp -o StrictHostKeyChecking=no root@${trans_ip}:/root/route.txt ${scripts_path}/files/${trans_ip}_new.txt
+ awk '{if ($5 != "0") print $0}' ${scripts_path}/files/${trans_ip}_old.txt | awk '{$5 = ""; $6 = ""; $7 = ""; print $0}' > ${scripts_path}/files/${trans_ip}_old_modify.txt
+ awk '{if ($5 != "0") print $0}' ${scripts_path}/files/${trans_ip}_new.txt | awk '{$5 = ""; $6 = ""; $7 = ""; print $0}' > ${scripts_path}/files/${trans_ip}_new_modify.txt
+ diff ${scripts_path}/files/${trans_ip}_old_modify.txt ${scripts_path}/files/${trans_ip}_new_modify.txt
+ if [ $? -eq 0 ]; then
+ echo -e "${GREEN} ${trans_ip} 路由没变 ${RES}"
+ else
+ echo -e "${RED} ${trans_ip} 路由前后不一致 ${RES}"
+ echo "${trans_ip} 路由前后不一致" >> ${scripts_path}/files/${nc_yes_no}
+ echo -e "\n===============================================\n" >> ${scripts_path}/files/${nc_yes_no}
+ echo -e "${trans_ip} 重启前路由\n" >> ${scripts_path}/files/${nc_yes_no}
+ awk '{print $0}' ${scripts_path}/files/${trans_ip}_old.txt >> ${scripts_path}/files/${nc_yes_no}
+ echo -e "\n===============================================\n" >> ${scripts_path}/files/${nc_yes_no}
+ echo -e "${trans_ip} 重启后路由\n" >> ${scripts_path}/files/${nc_yes_no}
+ awk '{print $0}' ${scripts_path}/files/${trans_ip}_new.txt >> ${scripts_path}/files/${nc_yes_no}
+ echo -e "\n===============================================\n" >> ${scripts_path}/files/${nc_yes_no}
+ echo -e "\n===============================================\n"
+ route_num=$(( route_num + 1 ))
+ array_diffroute+=("${trans_ip}--路由前后不一致")
+ fi
+ rm -rf ${scripts_path}/files/${trans_ip}_old_modify.txt
+ rm -rf ${scripts_path}/files/${trans_ip}_new_modify.txt
+done
+if [ ${route_num} -ne 0 ] ; then
+ echo -e "\n${RED} 有${route_num}个服务器路由不一致 ${RES}"
+ echo "有${route_num}个服务器路由不一致" >> ${scripts_path}/files/${nc_yes_no}
+fi
+
+#分割线
+echo -e "\n===============================================\n"
+
+#测试端口连通性
+array_port=()
+for trans_ip in $(cat ${scripts_path}/build/${trans_file}) ; do
+ echo -e "${GREEN} 测试${trans_ip}服务器端口联通性 ${RES}\n"
+ echo -e "测试${trans_ip}服务器端口联通性\n" >> ${scripts_path}/files/${nc_yes_no}
+ while IFS=' ' read -r ip port desc || [[ -n "$ip" && -n "$port" && -n "$desc" ]] ; do
+ sshpass -f ${scripts_path}/build/${passwd_file} ssh -o StrictHostKeyChecking=no -n root@${trans_ip} "nc -zw2 ${ip} ${port}"
+ if [ $? -eq 0 ]; then
+ echo -e "${GREEN} ${desc} ${ip} ${port} 端口访问成功 ${RES}"
+ echo -e " ${desc} ${ip} ${port} 端口访问成功" >> ${scripts_path}/files/${nc_yes_no}
+ else
+ echo -e "${RED} ${desc} ${ip} ${port} 端口访问失败。。。。。。 ${RES}"
+ echo -e " ${desc} ${ip} ${port} 端口访问失败。。。。。。" >> ${scripts_path}/files/${nc_yes_no}
+ array_port+=("${trans_ip}访问${desc}${ip}:${port}失败")
+ fi
+ done < ${scripts_path}/build/${nc_file}
+ if [ -s ${scripts_path}/build/${aliyun_file} ] ; then
+ for aliyun_ip in $(cat ${scripts_path}/build/${aliyun_file}) ; do
+ if [ "${trans_ip}" = "${aliyun_ip}" ] ; then
+ while IFS=' ' read -r ip port desc || [[ -n "$ip" && -n "$port" && -n "$desc" ]] ; do
+ sshpass -f ${scripts_path}/build/${passwd_file} ssh -o StrictHostKeyChecking=no -n root@${trans_ip} "nc -zw2 ${ip} ${port}"
+ if [ $? -eq 0 ]; then
+ echo -e "${GREEN} ${desc} ${ip} ${port} 端口访问成功 ${RES}"
+ echo -e " ${desc} ${ip} ${port} 端口访问成功" >> ${scripts_path}/files/${nc_yes_no}
+ else
+ echo -e "${RED} ${desc} ${ip} ${port} 端口访问失败。。。。。。 ${RES}"
+ echo -e " ${desc} ${ip} ${port} 端口访问失败。。。。。。" >> ${scripts_path}/files/${nc_yes_no}
+ array_port+=("${trans_ip}访问${desc}${ip}:${port}失败")
+ fi
+ done < ${scripts_path}/build/${aliyun_nc_file}
+ fi
+ done
+ fi
+ echo -e "\n===============================================\n"
+ echo -e "\n===============================================\n" >> ${scripts_path}/files/${nc_yes_no}
+done
+
+
+#展示报错服务器
+if [ ${#array_ssherror[@]} -ne 0 ]; then
+ for element_ssherror in "${array_ssherror[@]}" ; do
+ echo -e "${RED} ${element_ssherror} ${RES}"
+ done
+ echo -e "\n===============================================\n"
+fi
+
+if [ ${#array_login[@]} -ne 0 ]; then
+ for element_login in "${array_login[@]}" ; do
+ echo -e "${RED} ${element_login} ${RES}"
+ done
+ echo -e "\n===============================================\n"
+fi
+
+if [ ${#array_nc[@]} -ne 0 ]; then
+ for element_nc in "${array_nc[@]}" ; do
+ echo -e "${RED} ${element_nc} ${RES}"
+ done
+ echo -e "\n===============================================\n"
+fi
+
+if [ ${#array_reboot[@]} -ne 0 ]; then
+ for element_reboot in "${array_reboot[@]}" ; do
+ echo -e "${RED} ${element_reboot} ${RES}"
+ done
+ echo -e "\n===============================================\n"
+fi
+
+if [ ${#array_diffroute[@]} -ne 0 ]; then
+ for element_diffroute in "${array_diffroute[@]}" ; do
+ echo -e "${RED} ${element_diffroute} ${RES}"
+ done
+ echo -e "\n===============================================\n"
+fi
+
+if [ ${#array_port[@]} -ne 0 ]; then
+ for element_port in "${array_port[@]}" ; do
+ echo -e "${RED} ${element_port} ${RES}"
+ done
+ echo -e "\n===============================================\n"
+fi
+
+#备份必要的文件
+echo -e "\n${GREEN} 文件已备份到目录${scripts_path}/backup/${date}_nc下 ${RES}"
+echo "文件已备份到目录${scripts_path}/backup/${date}_nc下" >> ${scripts_path}/files/${nc_yes_no}
+echo -e "${GREEN} ${scripts_path}/backup/${nc_yes_no}是报错和连通性测试结果文件 ${RES}\n"
+echo "${scripts_path}/backup/${nc_yes_no}是报错和连通性测试结果文件" >> ${scripts_path}/files/${nc_yes_no}
+mkdir -p ${scripts_path}/backup/${date}_nc
+cp -rf ${scripts_path}/files/${nc_yes_no} ${scripts_path}/backup
+mv ${scripts_path}/files ${scripts_path}/build ${scripts_path}/backup/${date}_nc
+cp -rf ${scripts_path}/conf/${original} ${scripts_path}/backup/${date}_nc/build
+
diff --git a/sh/udpseq_del.bat b/sh/udpseq_del.bat
new file mode 100644
index 0000000..e68909c
--- /dev/null
+++ b/sh/udpseq_del.bat
@@ -0,0 +1,4 @@
+@echo off
+set SrcDir=C:\fcserver_q-x64\xtp\quote2\1
+set DaysAgo=0 %Զ壬˴0ǰ%
+forfiles /p %SrcDir% /m udpseq* /c "cmd /c del /f /q /a @path"
\ No newline at end of file
diff --git a/sh/xz_log_all.sh b/sh/xz_log_all.sh
new file mode 100644
index 0000000..3cf0bfe
--- /dev/null
+++ b/sh/xz_log_all.sh
@@ -0,0 +1,98 @@
+#!/bin/bash
+# 功能：扫描 /home/system 下所有包含指定年份日志的目录，列出确认再打包
+# 删除功能在74 75 行
+# 用法：./xz_log_all.sh <年份> 例如：./xz_log_all.sh 2025
+
+set -u
+
+if [ $# -ne 1 ]; then
+ echo "错误：请指定年份，例如 ./xz_log_all.sh 2025"
+ exit 1
+fi
+year="$1"
+
+if ! [[ "$year" =~ ^[0-9]{4}$ ]]; then
+ echo "错误：年份格式不正确，应为四位数字"
+ exit 1
+fi
+
+# 临时文件
+dir_all=$(mktemp)
+dir_target=$(mktemp)
+trap "rm -f $dir_all $dir_target" EXIT
+
+echo "正在扫描 /home/system 下的日志目录..."
+find /home/system -type f -name "*.log" -printf "%h\n" 2>/dev/null | sort -u > "$dir_all"
+
+echo "正在检查各目录中是否存在 ${year} 年的日志文件..."
+while IFS= read -r dir; do
+ [ -d "$dir" ] || continue
+ if find "$dir" -maxdepth 1 -type f -name "*$year*.log" -printf "%f\n" 2>/dev/null | grep -q .; then
+ echo "$dir" >> "$dir_target"
+ fi
+done < "$dir_all"
+
+if [ ! -s "$dir_target" ]; then
+ echo "未找到任何包含 ${year} 年日志的目录，退出。"
+ exit 0
+fi
+
+echo "找到以下 ${year} 年日志所在的目录（共 $(wc -l < "$dir_target") 个）："
+cat -n "$dir_target" | sed 's/^/ /'
+
+read -p "是否开始打包这些目录中的 ${year} 年日志？(y/N) " -r confirm
+if [[ ! "$confirm" =~ ^[Yy]$ ]]; then
+ echo "操作已取消。"
+ exit 0
+fi
+
+success_count=0
+fail_count=0
+total=$(wc -l < "$dir_target")
+echo "开始打包（共 $total 个目录）..."
+
+# 循环读取目录列表
+while IFS= read -r dir; do
+ current=$((success_count + fail_count + 1))
+ echo "[$current/$total] 正在处理目录：$dir"
+
+ # 使用子shell处理，避免影响父shell环境，并重定向 stdin 以防干扰
+ (
+ cd "$dir" < /dev/null || exit 1
+
+ # 统计文件数量
+ file_count=$(find . -maxdepth 1 -type f -name "*$year*.log" -printf "%f\n" 2>/dev/null | wc -l)
+ if [ "$file_count" -eq 0 ]; then
+ echo " 目录中没有 $year 年的日志文件，跳过"
+ exit 0
+ fi
+ echo " 找到 $file_count 个文件，正在压缩..."
+
+ # 打包压缩（直接管道传递 null 分隔的文件名）
+ if find . -maxdepth 1 -type f -name "*$year*.log" -printf "%f\0" | tar --null -c -T - | xz -9 > "${year}.tar.xz"; then
+ echo " ✓ 已生成 ${year}.tar.xz"
+ # 如需删除原始文件，取消下面注释
+ find . -maxdepth 1 -type f -name "*$year*.log" -delete
+ echo " 已删除原始文件"
+ exit 0
+ else
+ echo " ✗ 打包失败 $dir" >&2
+ exit 1
+ fi
+ )
+
+ # 根据子shell退出码统计成功/失败
+ if [ $? -eq 0 ]; then
+ ((success_count++))
+ else
+ ((fail_count++))
+ fi
+
+done < "$dir_target"
+
+echo "完成！成功: $success_count, 失败: $fail_count"
+if [ $fail_count -gt 0 ]; then
+ echo "请检查失败的目录。"
+fi
+echo "如需删除原始日志文件，可进入对应目录手动执行：rm -f *${year}*.log"
+echo "当前已启用删除原始文件"
\ No newline at end of file
diff --git a/sh/xz_log_all_month.sh b/sh/xz_log_all_month.sh
new file mode 100644
index 0000000..cf70d3b
--- /dev/null
+++ b/sh/xz_log_all_month.sh
@@ -0,0 +1,108 @@
+#!/bin/bash
+# 功能：按年份/月份打包 /home/system 下的日志文件
+# 用法：
+# ./xz_log_all.sh 打包上个月的日志
+# ./xz_log_all.sh 2025 打包2025年全年
+# ./xz_log_all.sh 202503 打包2025年3月
+# 注意：删除原始文件功能在89行，可自行注释或开启
+
+set -u
+
+# -------------------- 参数解析 --------------------
+if [ $# -eq 0 ]; then
+ # 无参数：打包上个月
+ match_str=$(date -d "$(date +%Y-%m-01) -1 month" +%Y%m)
+ echo "未指定年份/月份，将打包上个月 ($match_str) 的日志。"
+elif [ $# -eq 1 ]; then
+ param="$1"
+ if [[ "$param" =~ ^[0-9]{4}$ ]]; then
+ match_str="$param"
+ echo "将打包 $match_str 年全年的日志。"
+ elif [[ "$param" =~ ^[0-9]{6}$ ]]; then
+ match_str="$param"
+ echo "将打包 $match_str 年月的日志。"
+ else
+ echo "错误：参数必须是 4 位年份或 6 位年月（如 2025 或 202503）"
+ exit 1
+ fi
+else
+ echo "错误：参数数量不正确，最多接受一个参数。"
+ exit 1
+fi
+
+# -------------------- 临时文件 --------------------
+dir_all=$(mktemp)
+dir_target=$(mktemp)
+trap "rm -f $dir_all $dir_target" EXIT
+
+# -------------------- 扫描目录 --------------------
+echo "正在扫描 /home/system 下的日志目录..."
+find /home/system -type f -name "*.log" -printf "%h\n" 2>/dev/null | sort -u > "$dir_all"
+
+echo "正在检查各目录中是否存在匹配 $match_str 的日志文件..."
+while IFS= read -r dir; do
+ [ -d "$dir" ] || continue
+ if find "$dir" -maxdepth 1 -type f -name "*${match_str}*.log" -printf "%f\n" 2>/dev/null | grep -q .; then
+ echo "$dir" >> "$dir_target"
+ fi
+done < "$dir_all"
+
+if [ ! -s "$dir_target" ]; then
+ echo "未找到任何包含匹配 $match_str 的日志的目录，退出。"
+ exit 0
+fi
+
+echo "找到以下匹配的目录（共 $(wc -l < "$dir_target") 个）："
+cat -n "$dir_target" | sed 's/^/ /'
+
+read -p "手动执行前请查看该脚本是否开启删除功能，确认后再继续，是否开始打包这些目录中的日志？(y/N) " -r confirm
+if [[ ! "$confirm" =~ ^[Yy]$ ]]; then
+ echo "操作已取消。"
+ exit 0
+fi
+
+# -------------------- 执行打包 --------------------
+success_count=0
+fail_count=0
+total=$(wc -l < "$dir_target")
+archive_name="${match_str}.tar.xz"
+echo "开始打包（共 $total 个目录）..."
+
+while IFS= read -r dir; do
+ current=$((success_count + fail_count + 1))
+ echo "[$current/$total] 正在处理目录：$dir"
+
+ # 使用子 shell 处理单个目录
+ (
+ cd "$dir" < /dev/null || exit 1
+
+ file_count=$(find . -maxdepth 1 -type f -name "*${match_str}*.log" -printf "%f\n" 2>/dev/null | wc -l)
+ if [ "$file_count" -eq 0 ]; then
+ echo " 目录中没有匹配的日志文件，跳过"
+ exit 0
+ fi
+ echo " 找到 $file_count 个文件，正在压缩..."
+
+ if find . -maxdepth 1 -type f -name "*${match_str}*.log" -printf "%f\0" | tar --null -c -T - | xz -9 > "$archive_name"; then
+ echo " ✓ 已生成 $archive_name"
+ # 如需删除原始文件，取消下面注释（谨慎！）
+ find . -maxdepth 1 -type f -name "*${match_str}*.log" -delete
+ exit 0
+ else
+ echo " ✗ 打包失败 $dir" >&2
+ exit 1
+ fi
+ )
+
+ if [ $? -eq 0 ]; then
+ ((success_count++))
+ else
+ ((fail_count++))
+ fi
+done < "$dir_target"
+
+echo "完成！成功: $success_count, 失败: $fail_count"
+if [ $fail_count -gt 0 ]; then
+ echo "请检查失败的目录。"
+fi
+echo "执行完成"
\ No newline at end of file
diff --git a/sh/zhubi_del.bat b/sh/zhubi_del.bat
new file mode 100644
index 0000000..367c94b
--- /dev/null
+++ b/sh/zhubi_del.bat
@@ -0,0 +1,4 @@
+@echo off
+set SrcDir=C:\fcserver_q-x64
+set DaysAgo=3 %Զ壬˴3ǰ%
+forfiles /p %SrcDir% /m zhubi_* /d -%DaysAgo% /c "cmd /c del /f /q /a @path"
\ No newline at end of file
diff --git a/sh/微信双开.bat b/sh/微信双开.bat
new file mode 100644
index 0000000..cb580c0
--- /dev/null
+++ b/sh/微信双开.bat
@@ -0,0 +1,7 @@
+@echo off
+#关闭已经启动的微信
+taskkill /f /t /im WeChat.exe
+#想开几个微信就重复几行；其中C:\Program Files\Tencent\WeChat为安装路径，可以根据自己安装路径进行替换
+start /d "D:\Program Files\Tencent\Weixin\Weixin.exe"
+start /d "C:\Program Files\Tencent\WeChat" WeChat.exe
+exit
\ No newline at end of file